IMPORTANT NOTICE: THE BARRE IS RATED TO 100 LBS MAXIMUM. PLEASE DO NOT LEAN OR PULL DOWN ON THE BARRE. Studio Barre Installation:. Once the mount is installed, the Barre can be easily attached in two simple steps:. To detach the bar, simply unscrew t

<section id="isPasted">IMPORTANT NOTICE: THE BARRE IS RATED TO 100 LBS MAXIMUM. PLEASE DO NOT LEAN OR PULL DOWN ON THE BARRE.Studio Barre Installation:Once the mount is installed, the Barre can be easily attached in two simple steps:<ol><li>Insert the two metal arms that hold the bar into the keyholes behind either side of the Studio. Insert the arm at the top of the keyhole, then slide it down into place. Lock each arm in position by pushing the protruding lever down toward the arm. Now your Studio is ready to hold the bar.</li><li>With the caps at the end of the bar unscrewed slightly (1/4-1/2&quot; is plenty), line the T-shaped hook on each arm with the hole on the underside of the bar. Insert the T-hook into the bar, one side at a time, and screw the ends of the caps snuggly into place.&#xA0;</li></ol>To detach the bar, simply unscrew the caps at each end to loosen, lift the bar up and&#xA0;off the T-hooks, one at a time, and set to the side. Remove the metal arms one at a time at the back of the Studio by lifting the&#xA0;lever to unlock the arm, and then pulling each arm up and out of the keyhole. It&apos;s easiest to lift each arm by pulling at the end closest to the Studio screen.<img src="https://attachments.gorgias.help/30BVo7vV31v7rvzm/hc/JWjXVxG3R4rxDvMq/2025092813-9b03f0cf-e583-4e51-8462-a7b19da4ccd3-file-tpgohvswtj.png" style="width: 565px;" class="fr-fic fr-dib"> Studio Lift Barre Installation:With the Studio Lift, the metal arms seen above will connect into slots located on each side of the Lift itself. There are small magnetic covers that hide the bar insert slot. Once these have been installed, the rest is the same as above with the Studio installation:&#xA0;<ol><li>Insert the two metal arms that hold the bar into the keyholes behind either side of the Lift. Insert the arm at the top of the keyhole, then slide it down into place. Lock each arm in position by pushing the protruding lever down toward the arm. Now your Lift is ready to hold the bar.</li><li>With the caps at the end of the bar unscrewed slightly (1/4-1/2&quot; is plenty), line the T-shaped hook on each arm with the hole on the underside of the bar. Insert the T-hook into the bar, one side at a time, and screw the ends of the caps snuggly into place.&#xA0;</li></ol>To detach the bar, simply unscrew the caps at each end to loosen, lift the bar up and&#xA0;off the T-hooks, one at a time, and set to the side. Remove the metal arms one at a time at the sides of the Lift by lifting the&#xA0;lever to unlock the arm, and then pulling each arm up and out of the keyhole. It&apos;s easiest to lift each arm by pulling at the end closest to where the arm attaches to the insert.<img src="https://attachments.gorgias.help/30BVo7vV31v7rvzm/hc/JWjXVxG3R4rxDvMq/2025092813-08497aef-2ae2-4e59-a621-25eec9bf3378-file-xesofhbgsg.png" style="width: 300px;" class="fr-fic fr-dib"></section><footer> </footer>

Attaching and Removing the Barre

The Studio Barre accessory is attached to the wall via a second mounting plate just below the Studio’s mounting plate. While the Barre can be attached and removed from the mounting plate, the plate itself cannot be adjusted once mounted to the wall.

At What Height Should the Barre be Placed?

The Barre wood is unfinished but will be well-sanded and smooth. We recommend giving the wood a light clean every now and then to avoid visible build up of sweat or dirt. It should only be cleaned with Murphy Oil Soap and a dry towel. Pro tip: Put th

The Barre wood is unfinished but will be well-sanded and smooth. We recommend giving the wood a light clean every now and then to avoid visible build up of sweat or dirt. It should only be cleaned with Murphy Oil Soap and a dry towel.Pro tip: Put the soap onto a cloth or paper towel first, then wipe. A little bit goes a long way!

How do I clean the Barre?

Call us if you need an immediate assistance!

Community

Submit a request

FORME

Accessories

How do I keep my Studio software up to date?

How do I clean my Studio?

Caring for Your Studio

How to Check your Network Status

Network Connection Requirements

Connectivity

How do I pair my Bluetooth headphones or speaker?

Your FORME Account

My Studio was just installed, how do I get started?

Using your Heart Rate Monitor

The User Manual

Getting Started with Your Studio

How to prepare for your Live Training Session

Live 1:1 Training on Your Device

Troubleshooting Live 1:1 Training session issues

Custom Workouts

Live 1:1 Training

Where can I access my membership statements?

Why do I need to add an order number to my membership?

How much is a membership with hardware?

I received an email saying that my membership has lapsed. How do I fix that?

How does membership billing work?

If I choose to return my Studio or Lift within 30 days, will my membership be refunded?

Family Plan: Add+/Remove Profile, Billing and Subscriptions

How do I cancel my membership?

What does a FORME membership cover?

Can I skip membership setup when I create my account?

Membership & Account

What is your cancellation policy?

Orders

Certificate of Insurance

Shipping + Installation

How do I access the mobile app?

I cannot get my Apple Watch to connect to the FORME app

How to setup my Apple Watch using the FORME app

How do I stream a workout in the app?

What can I do on the app?

The App

Apple Watch is not showing proper heart rate during classes on the Studio

My headphones won’t connect to the Studio

I’m having trouble connecting to the internet

Troubleshooting

Safety Recommendations

Troubleshooting the Studio Lift

Planned Sessions

Setting the Passcode

In-session workout screen

Attaching and detaching accessories

Setting the resistance for the Lift arms

Using Your Lift

Settings | WiFi

More Music

How do I adjust the brightness?

Studio Settings

Streaming Classes

Settings | Restart

Settings | Sound

Recommended Classes

Using Your Studio

How do I submit a claim?

What Extended Warranty options are available?

Warranty

TrueMed and FORME

Partnerships