Adjusting the Lift arm height
The Studio Lift arms can be adjusted vertically to 7 different angles. We call this adjusting the “height” of the arms. To adjust the height, press and hold the Height button (the one with the line) on the arm you wish to unlock. On the screen, you’ll see the height unlock. Once fully unlocked, you can begin to move the arm to the height position you want. The current position of the arm will be filled in black, and the intended destination will appear as a dotted outline. As you move the arm, the current position will track till you arrive at the destination position. Remember to always use two hands when adjusting the arms.
Continue to hold the button while you support the arm with your other hand. Now move the arm up or down. When you have the arm at your desired height (1 - 7), continue to hold the arm and release the button with your other hand. Wait a second until you see the height lock on the screen.
For safety purposes, we only allow you to change the position of one arm at a time. Also, the cables should be fully retracted before you adjust the arm in any way.