Turning Your Lift On and Off

To wake your Studio Lift, simply tap on the screen. To power down, tap the Sleep button when you’ve finished your workout session. The Sleep button is located on the session summary screen and in the Control Center. 

In the rare case when a power cycle is needed, follow these steps:

  • Find the lower access door on the right side of your Studio Lift. Tap the top of that door, and it will tilt out. 
  • Remove the door and set it aside. Inside the door is a rocker switch. Simply flip that switch to power your Studio Lift off or on. If you have trouble reaching the switch, just grab a pen. If your Lift is off, just flip the switch in the other direction to turn it back on.
  • Alternatively, you can pull the AC power cable from the outlet, wait 5 seconds, then plug it back in.

Note: You do not need to use the circular power button on the back right side of the Studio to power the Lift on or off.